• Maxi wired box 26WB-*
    Maxi wired box 26WB-*
  • Skini wired panel 32XP-*
    Skini wired panel 32XP-*
  • Maxi wired box 26WB-* thum
  • Skini wired panel 32XP-* thum

Skini / Maxi Patchbays

Skini patchbays lets you fit 32 jacks per row, and Maxi patchbays fit 26 jacks per row.

Key Features and Benefits

  • Broadcasting Stations, Halls.
  • Number of Holes and Rows.
    Skini: 1RU, 64 holes, 2 rows.
    Maxi: 1RU, 52 holes, 2 rows.
  • Tech Data
  • Downloads

Skini / Maxi Patchbays

Type Model Description Connector Standard package
Skini 32-12A/620A/EIA 1U 620A x 64 1
Maxi 612A/320A/EIA 1U 320Ax52 1

Wired Box

Type Model Panel Size Connector Standard package
Front Rear
Skini
32WB-F 1 RU 620A × 64 90-602 × 4 1
32WB-H 1 RU 620A × 64 90-602 × 4 1
32WB-W 1 RU 620A × 64 90-602 × 4 1
Maxi
26WB-F 1 RU 320A × 52 90-602 × 4 1
26WB-H 1 RU 320A × 52 90-602 × 4 1
26WB-W 1 RU 320A × 52 90-602 × 4 1
Note:
*90-602 connector is identical to ELCO 00-8016-090-∗∗∗-702V connector

Wired Panels

Type Model Panel 1 Panel 2 Standard package
Size Connector Size Connector
Skini
32XP-F 1 RU 620A × 64 4 RU XLR3-31F77 x 32
XLR3-32F77 x 32
1
32XP-H 1 RU 620A × 64 4 RU XLR3-31F77 x 32
XLR3-32F77 x 32
1
32XP-W 1 RU 620A × 64 4 RU XLR3-31F77 x 32
XLR3-32F77 x 32
1
Note:
*Cables are 2 meters in length.

Audio Patchbays (Skini / Maxi) Related Products

Type model Description Standard package
- 320A Maxi Jack 1
- 620A Skini Jack 1
- NP3TMC-B Maxi/Skini Plug 1
- PH50A Maxi/Skini/Video Patch Cord Holder 1
- DS10-AS2 Designation Strip for Skini 2 pcs
- DS10-AS3 Designation Strip for Maxi 2 pcs
90 - 602 Connector Format (Wired box)
< Rear panel >4321
BantamLower row 25~48 chUpper row 25~48 chLower row 1~24 ch Upper row 1~24 ch
SkiniLower row 17~32 chUpper row 17~32 chLower row 1~16 chUpper row 1~16 ch
MaxiLower row 14~26 chUpper row 14~26 chLower row 1~13 chUpper row 1~13 ch

90 - 602 connector is mated with 90 - 608 connector.
90 - 608 requires either 125 or 525 contact and 90 - T cover for assembling.

  • *The numbers in parentheses are ELCO ordering codes.
  • ** Contact extraction tool : 06 - 1877 - 04.
    Crimping pliers for 525 : 06 - 1001 - 015 (AWG #18), 06 - 1001 - 016 (AWG #20 - #22), 06 - 1001 - 017 (AWG #24 - #26).
Wiring Table for 90 - 602
Maxi Skini Bantam HOT COLD SHIELD
Channel no. 1 14 1 17 1 25 A H R
2 15 2 18 2 26 B J S
3 16 3 19 3 27 C K T
4 17 4 20 4 28 D L U
5 18 5 21 5 29 E M V
6 19 6 22 6 30 F N W
7 20 7 23 7 31 X AE AM
8 21 8 8 32 25 Y AF AN
9 22 9 25 9 33 Z AH AP
10 23 10 26 10 34 AA AJ AR
11 24 11 27 11 35 AB AK AS
12 25 12 28 12 36 AC AL AT
13 26 13 29 13 37 BJ BD BY
14 30 14 38 BK BT BZ
15 31 15 39 BL BU CA
16 32 16 40 BM BV CB
14 30 17 41 BN BW CC
15 31 18 42 BP BX CD
16 32 19 43 CF CN CW
14 30 20 44 CH CP CX
15 31 21 45 CJ CR Cy
16 32 22 46 CK CS CZ
14 30 23 47 CL CT DA
15 31 24 48 CM CU DB

Technical Note

Audio Patchbay Normalling Descriptions

Output from a device is obtained from the upper row, while input to a device is normally connected to the lower row. Users can select from the following three types of connecting functions.

 
< Wiring formats connecting upper and lower connectors >
F: Full normal connection H: Half normal connection W: Double normal connection

Full Normal Format (series)

The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is not connected to the lower jack. A signal can be entered by inserting a plug in the lower jack. In this case the signal is not connected to the upper jack.

Half Normal Format (half-parallel)

The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is connected to the lower jack. This format allows the signal to be obtained in parallel. The signal can be prevented from going to the lower jack by inserting a dummy plug. Signals are input by inserting a plug in the lower jack. In this case the signal is not connected to the upper jack.

Double Normal Format (series-parallel)

The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is connected to the lower jack. This format allows the signal to be obtained in parallel. The signal can be prevented from going to the lower jack by inserting a dummy plug. A signal can be entered by inserting another plug in the lower jack. Note that the signal in this case is connected to the upper jack. This can be prevented by inserting a dummy plug.

Drawing

Specification

Historys

+

Download form

*required

*Download file
*Country
*Company
*Name
Zip
Address
Phone
*E-Mail

Please fill out this form to download your file. We use your personal information collected through our Services for purposes described in the Privacy Policy or Site Policy.
If you agree to the above, please click on the "Agree" button below to be taken to downloads.

Accept